PG&E, SCE and SDG&E: Compare Solar Billing Rules
Published by FreeSolarPanelsCA · Last updated
A statewide solar savings number is not a tariff. PG&E, SCE and SDG&E use different residential import schedules under their Solar Billing Plans. All need time-based export calculations. Check the generation provider as well as the utility delivering the power.
Compare the same roof and load
Keep system size, shade, usage and financing assumptions the same when comparing models. Then change the tariff. If both the equipment and the tariff change at once, you cannot tell what caused the difference in projected savings. Source.
Ask the bidder for the hourly data behind the annual total. Identify energy used directly, stored and exported. Request the source and effective date of every rate table. Source.
Do not omit the remaining bill
Import charges and export credits are not the whole cost. Ask which fixed charges and taxes remain, which credits can offset them, and how any annual settlement works. A promise to eliminate the utility bill needs close scrutiny. Source.
SMUD and Riverside customers should use the municipal rows below. The investor-owned utility comparison does not set their rates. Source.
Worked examples by utility
For each example, assume 1,000 kWh is used at home rather than bought from the grid. At the shared California average of 0.3361 dollars per kWh, that equals $336.10 in avoided purchases. EIA, July 2026, Table 5.6.A. This is the same comparison baseline for every row, not any utility's actual import price.
Sacramento Municipal Utility District (SMUD): Time-of-Day (5-8 p.m.) with the Solar and Storage Rate rider
The SSR pays 9.6 cents per exported kWh from June 1, 2026, at any hour or season. Imported power still follows the Time-of-Day schedule. Legacy accounts have different terms. Utility source, checked October 13, 2026.
Example: 1,500 kWh generated minus 1,000 kWh used at home leaves 500 kWh exported. The baseline values only the home-use portion at $336.10.
For SSR, 500 exported kWh × 9.6 cents/kWh = 4,800 cents in export credit, using the published June 1, 2026 rate. Actual avoided purchases must use the home’s Time-of-Day import prices. Use the actual tariff to complete the calculation.
SMUD pays the same export credit all day. The export-timing case for a battery is therefore weaker than under an hourly export tariff. Storage can still avoid peak-hour purchases or support selected backup loads. Compare that value with its cost and with SMUD program terms; a battery is not automatically the better purchase.
Riverside Public Utilities: Domestic Time of Use (DTOU) with the Self-Generation Program
RPU values surplus energy using its Avoided Cost of Energy rate and, where applicable, a Time of Delivery Factor. New residential self-generation customers use DTOU. Existing net-metering agreements are not replaced by this description. Utility source, checked October 13, 2026.
Example: 1,500 kWh generated minus 1,000 kWh used at home leaves 500 kWh exported. The baseline values only the home-use portion at $336.10.
For RPU, apply the current ACOE rate and applicable Time of Delivery Factor to the 500 exported kWh. A current complete rate table has not been confirmed for this example, so an export total cannot be calculated here. Check the current RPU tariff before estimating the credit. Use the actual tariff to complete the calculation.
RPU storage needs a DTOU calculation, using its own avoided-cost export rules. Ask for solar-only and solar-plus-storage bill models. Include backup needs and the local storage rebate rules; a model built for an investor-owned utility is not a substitute.
Pacific Gas and Electric (PG&E): Electric Home (E-ELEC) for residential Solar Billing Plan accounts
PG&E uses hourly Energy Export Credits under its Solar Billing Plan. Imported electricity is billed on E-ELEC, rather than offset one-for-one by each exported kWh. Check generation charges separately if a community choice provider supplies your power. Utility source, checked October 13, 2026.
Example: 1,500 kWh generated minus 1,000 kWh used at home leaves 500 kWh exported. The baseline values only the home-use portion at $336.10.
For PG&E, multiply each hour’s share of the 500 exported kWh by that hour’s applicable export credit, then add the results. An annual export payment cannot be calculated here without the hourly export rates for your account. Request those rates from your utility before estimating the payment. Use the actual tariff to complete the calculation.
PG&E hourly export credits and E-ELEC peak purchases create a strong reason to model storage. Store midday surplus for later home use and compare that avoided purchase with the export credit given up. Battery losses, price and your hourly load can still make solar alone the better value.
Southern California Edison (SCE): TOU-D-PRIME for residential Solar Billing Plan accounts
SCE credits exported electricity at time-dependent Energy Export Credit values. Imports follow TOU-D-PRIME. Export credits cannot erase every fixed tax or service charge, so a production estimate alone cannot show the remaining bill. Utility source, checked October 13, 2026.
Example: 1,500 kWh generated minus 1,000 kWh used at home leaves 500 kWh exported. The baseline values only the home-use portion at $336.10.
For SCE, multiply each hour’s share of the 500 exported kWh by that hour’s applicable export credit, then add the results. An annual export payment cannot be calculated here without the hourly export rates for your account. Request those rates from your utility before estimating the payment. Use the actual tariff to complete the calculation.
SCE customers should test a battery against TOU-D-PRIME evening use and the hourly export schedule. Saving daytime production for peak purchases can be valuable. The comparison must subtract forgone export credits and storage losses, then include the battery price and replacement risk.
San Diego Gas & Electric (SDG&E): EV-TOU-5 for residential Solar Billing Plan accounts
SDG&E uses hourly export credits and EV-TOU-5 import periods. If a community choice aggregator supplies generation, that provider sets the generation import and export prices. Delivery charges remain part of the bill. Utility source, checked October 13, 2026.
Example: 1,500 kWh generated minus 1,000 kWh used at home leaves 500 kWh exported. The baseline values only the home-use portion at $336.10.
For SDGE, multiply each hour’s share of the 500 exported kWh by that hour’s applicable export credit, then add the results. An annual export payment cannot be calculated here without the hourly export rates for your account. Request those rates from your utility before estimating the payment. Use the actual tariff to complete the calculation.
Under SDG&E hourly export credits, test storage against the EV-TOU-5 peak period and your generation provider. Compare energy kept for home use with the credit it would otherwise earn. Include losses and costs rather than assuming all exported energy has one low value.